How to handle the problems in running pellet machine

If the pellet machine failed to boot, you need to check the following points.

1. Whether the power supply is normal connected.
2. Whether the shearing pin is break down.
3. Whether the overtravel-limit switch is in place.
4. Whether the gateway of pellet machine is in place.

If the electricity power is unstable, the following factors and steps should be considered.

1. The space between compression roller and ring die is unsuitable adjusted.
2. Riving knife was badly worn, the material is asymmetrically distributed.
3. Semi-finished products or recycled material contains powder too thick (caused by damaged classifying screen).
4. Raw material, add fluid and steam were not fully mixed.
5. Transmission belt is not of reasonable tightness.

.