2012年8月16日星期四

Correct operation of block grease when refuel the pellet machine

What is the correct operation of block grease when refuel the pellet machine, and how to solve the problems?

When refueling pellet machine, first shut the gas, then move block grease.
1. It is unavoidable forgetting to shut down the gas when moving block grease. In this circumstance it will be hard to move, do not move recklessly, shut the gas first.
2. If it was still hard to move after turning off the gas, please remove the inside hexagonal bolt to slide the block greases apart. Then put the two O shape rings correctly again in the middle of the block greases.
3. when the block greases is not linked to the oil line due to high pressure, the block greases will be cling. Just remove the inside hexagonal bolt.

没有评论:

发表评论